PDA

View Full Version : NP 231C Cheap

pre4runner
10-20-2008, 09:50 PM
I'm looking for a np231c preferably broken or in parts. Or just the 27 spline input shaft.

It's time to build a doubler
ckupq
10-20-2008, 10:41 PM
A 231,231 doubler? Damn, first for everything I guess.
Beefy
10-20-2008, 10:45 PM
Whats that :wtf:
CheapThrillB2
10-20-2008, 10:53 PM
whats what

heres a write up on how to do it with two ranger/explorer/Bronco 2 tcases (i just finished mine)

most likely the theory and the build up of the cases are the same (i'm not familar with jeep tcases)

http://www.therangerstation.com/Magazine/spring07/BW1350_1354_doubler.htm
Beefy
10-20-2008, 10:54 PM
A doubler
CheapThrillB2
10-20-2008, 10:59 PM
I can take my truck, start out on an steep incline. Put it in 5th gear (manual trans) and double low and let the clutch out with no throttle assistance and slowly climb the incline.
pre4runner
10-20-2008, 11:05 PM
94.46 : 1 low low range :woot:

or about 5 mph at 5000 rpm in first gear
CheapThrillB2
10-20-2008, 11:09 PM
94.6 : 1 low range :woot:

102:1 :ptt: :poke::lol::blabla::blabla::blabla:
pre4runner
10-20-2008, 11:21 PM
But when i do my axle swap i will have 111.5 or 106.2 : 1 so chew on that.

I am also going to try and make my own twin stick set up
CheapThrillB2
10-20-2008, 11:25 PM
But when i do my axle swap i will have 111.5 or 106.2 : 1 so chew on that.

I am also going to try and make my own twin stick set up

until then :ptt:

















All in good fun :shixxle:
pre4runner
10-20-2008, 11:39 PM
:shixxle: Now that the :hijacked: is over who has that busted t-case?
Fullsize4life
10-25-2008, 08:27 PM
What do they come in? I might be able to find one
pre4runner
10-25-2008, 08:41 PM
s-10, s-15 just about any small chevy truck or suv.

New goal is axles, another ring and pinion is shot.