FlamesFearMe's YJ

[FlamesFearMe]

http://i169.photobucket.com/albums/u232/FlamesFearMe/Jeeproll2.jpg
http://i169.photobucket.com/albums/u232/FlamesFearMe/Jeeproll1.jpg

1993 YJ

LT1
SM465
231/D300 doubler twin sticked
D60, high steer, locked, 5.13s w/ winch tab
D60, locked 5.13s
Rear cutting break
Stock YJ front leaves
Stock XJ rear leaves (4-5" stretch)
39.5" or 42" Iroks on Hummer Beadlocks with rock rings
OBA
Tube fenders
Comp cut rear
Full cage
5pt harnesses
Baja Seats
Winch

Still want the option of the rear seat, because of C-Lo and OC.

WIP for sure, I have a few parts, but I won't really start part whoring until after the 1st of the year.

[sglide]

if theres anything i can help with let me know

[Desert Eagle]

if theres anything i can help with let me know

Just this

LT1
SM465
231/D300 doubler twin sticked
D60, high steer, locked, 5.13s w/ winch tab
D60, locked 5.13s
Rear cutting break
Stock YJ front leaves
Stock XJ rear leaves (4-5" stretch)
39.5" or 42" Iroks on Hummer Beadlocks with rock rings
OBA
Tube fenders
Comp cut rear
Full cage
5pt harnesses
Baja Seats
Winch


:hehe:

[Mongo]

FFM, I've heard that it's hard to run a sbc 350 in a yj. Any problems?

[sglide]

Just this

LT1
SM465
231/D300 doubler twin sticked
D60, high steer, locked, 5.13s w/ winch tab
D60, locked 5.13s
Rear cutting break
Stock YJ front leaves
Stock XJ rear leaves (4-5" stretch)
39.5" or 42" Iroks on Hummer Beadlocks with rock rings
OBA
Tube fenders
Comp cut rear
Full cage
5pt harnesses
Baja Seats
Winch


:hehe:

OBA
Tube fenders
Comp cut rear
Full cage i can help with this part of the list, so maybe i should have said "if theres a small part of your list i can help you with":hehe:

[FlamesFearMe]

if theres anything i can help with let me know

Thanks, you are a much better person than DE.

Just this

LT1
SM465
231/D300 doubler twin sticked
D60, high steer, locked, 5.13s w/ winch tab
D60, locked 5.13s
Rear cutting break
Stock YJ front leaves
Stock XJ rear leaves (4-5" stretch)
39.5" or 42" Iroks on Hummer Beadlocks with rock rings
OBA
Tube fenders
Comp cut rear
Full cage
5pt harnesses
Baja Seats
Winch


:hehe:

I have an what is in RED already, dick.

FFM, I've heard that it's hard to run a sbc 350 in a yj. Any problems?

I know a bunch of people without problems, plus I have the JeepGod and Ingersoll in my bag of tricks.

i can help with this part of the list, so maybe i should have said "if theres a small part of your list i can help you with":hehe:

Thanks again.

[FlamesFearMe]

Update.

I added snow to the interior.

[MuddyPaws 3.0]

:lol:

[Cyco]

Update.

I added snow to the interior.

:lol::lol::lol:

Did you get it cheap from the guy that laid it on it's side at the dunes?

I thought you wheeled a VW.

[Grandman]

Repairs done or is this something your working on ?

[nick_n_ii]

Any updates as to how this thing is coming along?

[Blackjackbender]

just a heads up. if you use XJ rear springs it will put u at a 8ish" stretch unless you redrill the centering pin. Also im sure you are aware of this but if dont add another main leaf or stiffen the pack up they will reverse arch extremely soon. mine did it the first time out wheeling.

[FlamesFearMe]

UPDATE:

Picked up a 44/14 bolt combo with 5.13s, high steer, discs all the way around, locked front and rear, set up for SOA.

Picked up a D300. Going to run the D300 behind the AX-15 and the 4.0 for a while until I do the chevy swap.

Need to get H1s and tires yet.

To sum up-

4.0 to AX-15 to D300. 44/14 bolt combo with above mentioned goodies. 1" BL, 1" Currie lift shackles, and probably the 1.5" lift springs that I already have.

I can't do XJ springs in the rear with the 14 bolt without having to relocate the gas tank, but I don't want to lose my backseat.

[Fullsize4life]

Lets get going on this so you can wheel with us!!!!

[FlamesFearMe]

Lets get going on this so you can wheel with us!!!!

I am trying. Tires is going to be the tough item. They are so f'n expensive.

[Fullsize4life]

Man i bought brand new swampers last year. 38-13-16r for cheap. Brand new i think they were 850.00 but the wheels were like 360.00. I love the tires.

[nick_n_ii]

Sweet post pics once you get the build under way....

[sglide]

Lets get going on this so you can wheel with us!!!!there are some of us in the north wood waiting on this to

[Tie Dyed]

I am trying. Tires is going to be the tough item. They are so f'n expensive.



And the frame is in my back yard :hehe::hehe::hehe:

[FlamesFearMe]

And the frame is in my back yard :hehe::hehe::hehe:

Shit I forgot about that, I just picked up a new frame. It's ok though, I will use the frame that you have for something as well. You still want that 20 right?

UPDATE- Picked up a new tub and frame, so we are getting closer. Ish.

[MuddyPaws 3.0]

Are we just stacking parts up or is there actually going to be work done soon?

:hehe:

[FlamesFearMe]

Are we just stacking parts up or is there actually going to be work done soon?

:hehe:

Both really. The guy that I bought the axles from is a good buddy of mine, and we are going to the badlands the frist weekend of April, and he was worried that he would not get the 60/70 done in time, so he is going to run them there. I won't get possession of the axles until at least then. I am going to do the 300 and the axles on the Jeep now, but the tub and frame will be worked on this summer so I have everything exactly how I want it for a big winter swap.

BTW- send me a slew of kids that are smarter than me and it will get done!!!!!! I was looking at your build thread and those kids are lightyears ahead of me as far as knowledge and fab skills go.

[rusty-toy]

Those kids are are really impressive.
My Toy would still be a rusted piece of crap sitting in the back of my garage without them. And I know it is not done yet but even at this point it is way better than I ever expected.

Also this build sounds like it will be quite the wheeler.

[FlamesFearMe]

Those kids are are really impressive.
My Toy would still be a rusted piece of crap sitting in the back of my garage without them. And I know it is not done yet but even at this point it is way better than I ever expected.

Also this build sounds like it will be quite the wheeler.

I hope so. I am really torn on a few aspects because as much as I want to have a pile of tubes, I really want to be able to button it all up and have a rear seat for my girls. All of the mods will be done with my kids in mind, because I really want them to be involved.

[KennyOffroad]

Nice build and pics !

[Beefy]

:popcorn:

[nick_n_ii]

Any updates? I'd really like to see this thing live again.. (I'm kinda bias seeing it's my old YJ)