PDA

View Full Version : So umm...what color is trans fluid supposed to be?


MuddyPaws 3.0
11-19-2007, 03:02 PM
Crappy pic but I'm thinking not GREEN. :eek:

http://www.timstrader.com/web/temp/trans-coolant.JPG

Beefy
11-19-2007, 03:03 PM
Thats the new High performance stuff.... Is that in your wife's Van?

MuddyPaws 3.0
11-19-2007, 03:04 PM
Thats the new High performance stuff.... Is that in your wife's Van?

Yea, wife's van....:cry:

Beefy
11-19-2007, 03:07 PM
:eek: OMG what happened? Wait did the radiator die?

MuddyPaws 3.0
11-19-2007, 03:09 PM
:eek: OMG what happened? Wait did the radiator die?

ding ding ding....

Winner


Trans cooler in radiator sprung a leak, filled trans with coolant.

Beefy
11-19-2007, 03:10 PM
Well thats no good!



P.S.
Change my avatar back to Ed! :lol:

brewmenn
11-19-2007, 09:51 PM
last time I drained mine it looked like a chocolet milk shake.

Mongo
11-19-2007, 10:12 PM
Mine was a strawberry milkshake once, but never Lime.




BTW, thanks again Killer'B'.:hehe:

Stump
11-20-2007, 08:05 AM
That must be the new GM DEX-Doall fluid, one fluid used to fill everything. I had mine look like grape soda and smell like burning arse hair

MuddyPaws 3.0
11-20-2007, 07:33 PM
Well...it's moving under it's own power and seems to shift as well or better than before.

Flushed it with fluid and chemicals twice, then flushed it with fluid 3 more times.

Then I spent 2 hours flushing the trans fluid out of the damn motor and radiator. The normal flush stuff just wasn't cutting the oil so I had to put half a bottle of dish soap in the colling system and let that run for a while to cut the oil. Then flushed the crap out of it for about a half hour more with clear water till everything came out clear.

Prolly only a temp fix though. I know.

FlamesFearMe
11-20-2007, 09:26 PM
Last time I drained mine..... wait, you are supposed to drain them?

KILLERB468
11-21-2007, 05:39 PM
Well...it's moving under it's own power and seems to shift as well or better than before.

Flushed it with fluid and chemicals twice, then flushed it with fluid 3 more times.

Then I spent 2 hours flushing the trans fluid out of the damn motor and radiator. The normal flush stuff just wasn't cutting the oil so I had to put half a bottle of dish soap in the colling system and let that run for a while to cut the oil. Then flushed the crap out of it for about a half hour more with clear water till everything came out clear.

Prolly only a temp fix though. I know.

Did you install a new rad?? You are lucky it didn't wipe out the trans. The antifreeze attacks the frictions and releases the glue.

MuddyPaws 3.0
11-22-2007, 12:32 AM
I didn't replace the rad yet. ran the rad cooler lines back to themselves and then installed an aftermarket trans cooler. I'll get around to putting in a new radiator later.


I don't know how long the trans will last, but I had to at least try.





And hey look...killerb is here. :woot: