TJ stuff

[Nate4d]

front upper adjustable control arms and also an adjustable front trackbar. fora 4inch+lift

[Mongo]

Ty can make em????

[Blackjackbender]

Ty can make em????

I could probably make adjustable arms. but for the price he would be better off buying these.

for me to make them they will be $120 for joints, jam nuts, and tubing adapters.

if they where fixed arms I could do it for 30 bucks.

http://www.muddyrocksoffroad.com/rock-krawler-front-upper-high-misalignmentadjustable-control-arms.html


track bar I can not do. if it was setup for true Hi-steer I could but with the track bar bend its not doable. If he could find a tie rod end that match he factor ream in his track bar mount we could chop off the end of his track bar, weld in a tube adapter and thread the TRE in. but im thinking the stock track bars ID may be to small to fit a tube adapter in and still be big enough to have the right size threads for a TRE.

[MuddyPaws 3.0]

front upper adjustable control arms and also an adjustable front trackbar. fora 4inch+lift

XJ track bar the same s a TJ?

[Nate4d]

i would think so but considering one has a frame and the other doesnt im not sure.

[MuddyPaws 3.0]

Well find out.

[Tonka]

XJ track bar the same s a TJ?

I am running a rusty's xj adjustable trackbar with the tie rod end on the tj.

the lift height applications are different, but they work. Worst case, swap to a longer tie rod end with the same thread.


Here is some info on the rusty's stuff. I'd imagine other manufacturers may do the same.

http://rustysoffroad.com/mm5/merchant.mvc?Screen=PROD&Store_Code=rustys&Product_Code=RC-TB100-UV&Category_Code=SUS_TRAC

[MuddyPaws 3.0]

PM inbound to nate