PDA

View Full Version : Warn 8000 DOA ?

Grandman
02-15-2008, 04:51 PM
I should not have replaced my cb , seems its working the winch decided it wants some TLC too .

You hear the solinods make a solid click but no go . I havent done any thing with it yet but i suspect the motor is the issue .

What do you think it will be ?
Rover
02-15-2008, 05:01 PM
could be anything still, bad connection, motor, grounds, power
check this out marv

http://www.plcuk.co.uk/viewtopic.php?p=109754&sid=13d97c1b35c7e4af2d50f075a30f2753

http://www.plcuk.co.uk/viewtopic.php?t=8080&start=0&postdays=0&postorder=asc&highlight=

thank mongo for finding them awhile back
Mongo
02-15-2008, 05:06 PM
Have Roadhouse take a picture of it.:hehe:





Check what Nick said and report back.
Grandman
02-15-2008, 07:15 PM
so far i cleaned every connection on the pack , now the motor comes off and pull it apart . Getting 12.3 V up to it so must be a problem with the motor . Only the ground needed cleaning which is typical with these .
Mongo
02-15-2008, 07:23 PM
Can you see the soldered connections inside the housing on the motor? Sam had one of those break.
Grandman
02-15-2008, 07:29 PM
Can you see the soldered connections inside the housing on the motor? Sam had one of those break.

went thru the pack , checked voltage and pulled the pack off . Havent pulled the motor off yet to tear apart . Im taking a break , house work gave me a headache today . :flip:
Roadhouse
02-15-2008, 08:31 PM
Is it dead totally, or can you spool out?
Roadhouse
02-15-2008, 08:32 PM
Have Roadhouse take a picture of it.:hehe:


http://img.photobucket.com/albums/v654/Roadhouse66/ZJ%20Build/2008_02138-26-060020.jpg
Grandman
02-15-2008, 08:59 PM
Figured it out , if you smack it hard with a hammer its fine :hehe:


There is a very small star bolt that holds 2 of the brushes on the brush housing . One has gotten hot and ruined the damn thing . You buy the whole brush housing , been through this loop before . $40.00 if i recall .

Now ill give shaker his bad news because im taken my HS 9500 thats currently on his rig and he can use my 8000 after he buys the part :hehe:
ttocsnekia
02-17-2008, 10:36 PM
Your lucky, when mine stopped working the permanent magnet on the side broke into a million pieces.