View Full Version : 8.8 w/ 4.10's & Discs
ddeadserious
02-08-2008, 01:49 PM
Looks like original seller flaked on me.
Needs to have factory 4.10's, open carrier or LSD, the more complete the brake system the better(ebrake stuff is irrelevant), and needs to be from a 95-01 Explorer.
I'm located in Garden City(about halfway between Detroit and Ann Arbor), will travel within a reasonable distance.
I have about $200.
Blackjackbender
02-08-2008, 03:30 PM
have you checked out scrap busters?
ddeadserious
02-08-2008, 04:04 PM
have you checked out scrap busters?
ooh just called there. They don't have any on inventory, but I'm going to go down there tomorrow and look through the yard. They're like 1/2 the price of everywhere else I called.
thanks!
Blackjackbender
02-08-2008, 04:07 PM
ooh just called there. They don't have any on inventory, but I'm going to go down there tomorrow and look through the yard. They're like 1/2 the price of everywhere else I called.
thanks!
yeah they have pretty good prices there.
gerktj
02-08-2008, 10:05 PM
that's where I bought mine 2 years ago. They had a few new units with no calipers for 225.
Toivo
02-08-2008, 10:08 PM
shank that bad seller.
ddeadserious
02-09-2008, 05:32 PM
Just went to Scrap Busters, they didn't have any exploders newer than 94, and therefore 28 spline shafts and drum brakes.
So I'm still looking.
Mongo
02-09-2008, 06:20 PM
Go to www.car-part.com
I can't seem to link the search, but here is a screenshot that has abour 15% of the results.
http://i63.photobucket.com/albums/h153/dads95yj/88.jpg
Mongo
02-09-2008, 06:21 PM
Fyi, I did 1995 exploder to get 31 spline and disks.
ddeadserious
02-13-2008, 11:46 PM
Picked one up from Dix Auto Parts this afternoon for $200. Rusty as sin with no calipers, cut brake lines, and rotors with no hope; about 109,000 miles. Got the 4.10's though!
Mongo
02-14-2008, 12:09 AM
Need a lead on the flange yoke adaptor?
ddeadserious
02-14-2008, 01:57 AM
Need a lead on the flange yoke adaptor?
Nope, getting one from Joint Clutch & Gear tomorrow for $26. Thanks though.
vBulletin® v3.8.4, Copyright ©2000-2012, Jelsoft Enterprises Ltd.