just another TJ upgrade

[barh]

well its a start. b4
http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1302
upgrades to include,long arm front,fenders, a little bling.
lower brackets
http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1303
gotta love outa position:banghead:
http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1304
lowers
http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1306
changed mid stride & went 3 link.
http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1309
more to come:popcorn:

[barh]

not sure what happened but i'll try to do better next time.:shrug:

[barh]

lowers getting prime
http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1308
lowers mounted
http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1307
http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1310

[Mongo]

not sure what happened but i'll try to do better next time.:shrug:

fixed

[barh]

the right lower created a small clearance problem. thus the hillbilly fix.:eek:

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1311

and finally workin up the courage to begin the next phase which included sectioning the frame. if look close the frame was compromised at the point skid mounted.

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1312

stay tuned .:cheers: :popcorn:

[barh]

fixed

thank you.

[BIGBEN]

looks good. what are the plans for the frame?

[barh]

looks good. what are the plans for the frame?

section two spots. the rest looks pretty good. O & I haven,t forgot about the T-case. I will get with you soon. thats gonna be my doubler.

[BIGBEN]

not a problem on the t-case. it is tucked away on a shelf for you.



i was worried about frame rot on mine as well, but it looks solid for now. are you going to have to cut out a whole section of the frame or can you just cut and weld a small patch?

[barh]

this one brought tears as these fenders were nice.:cry:

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1313

look who had to rub it in. :flip:

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1314

[Beefy]

:woot: CUT

[barh]

not a problem on the t-case. it is tucked away on a shelf for you.



i was worried about frame rot on mine as well, but it looks solid for now. are you going to have to cut out a whole section of the frame or can you just cut and weld a small patch?

i cut out the bottom + about a 1/2 in up the side rolled a piece & stuck it in . 1st one was where the oem lower bracket was. then right side where the t-case mounted. that 1 was tricky as i had to add fasteners & make them line up.:banghead::dance2: musta messed up cause it worked the 1st time.:cheers: i'll get the pics up of this soon

[barh]

Oooooh sexy

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1318


there r two new additions in this 1. can u pic them out? lol :wtf:

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1327

[BIGBEN]

fenders and swaybar look good. :thumb:

[Evil Queen]

nice

[Black skull]

there r two new additions in this 1. can u pic them out? lol :wtf:

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1327

Sway bar & windshield light .
Looking good.

[Rover]

looks like a new michigan wheelers sticker on the tube fenders also :thumb:

[thrca]

I missed the swaybar and a-pillar light.. I was going for the MW sticker and hood latch.

[Black skull]

I guess there was more than 2 new changes , 4 so far.

[BIGBEN]

the lights were also removed from the front bumper.

[barh]

holy smokes. guess i was sleepin . i didn't even notice all those.:uh: I was refering to the sticker & the swaybar. & there's 1 more , the door hindge.:shrug: Lol

[barh]

now with the oem swaybar out of the way we were able to suck the bumbper back 3 in.

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1320

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1322

trimming tabs & gussets

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1323

all together. :cheers:


http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1325

[barh]

A little bling.

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1333
http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1334 :drool:

and some test flex. the first 1 show rear stuffed. lots of rear steer. have to address that when we do the rear.

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1330

then the front. this pile was approx 4 ft. you can see it it relationship to the barn.

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1328

and finally. got rocks???:D

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1331

http://www.michiganwheelers.com/forums/picture.php?albumid=161&pictureid=1332

thats probably it until after DI as i dont think i'll have time to finish the rear. left to do is rear double triagulated, belly up , wb stretch ,psc steer box, track bar & currie steering

[MuddyPaws 3.0]

I like the fenders. Turned out real nice.

Where did you get the LED lights?

[Evil Queen]

very nice!!!!

[barh]

I like the fenders. Turned out real nice.

Where did you get the LED lights?

thanx. triangle ones came from T&T.was out there & they were on the lowrider build.thought they looked cool so got me a set. round one from peterbilt . if i remember right they are truklites.