View Full Version : TJ 4.0 engine perches/brackets/mounts - the part that welds onto frame

KTM Mike
12-26-2007, 10:04 PM
I am swapping my 2.5 for a 4.0 - need the engine mounts that weld onto the frame (NOT the parts that bolt onto the engine or from the engine mounts to the frame....) So, if anyone has cut some out of a TJ 4.0 to do a V8 or other such swap - you musta cut out your old mounts! (hopefully carefully enough they can be re-used and welded back in place on my TJ) LMK what you have!



01-01-2008, 10:31 PM
you should be able to buy these from the dealer...

I bought my yj mounts there when I did the 4.0L conversion to it.