PDA

View Full Version : NV 231 transfer case

icemanii
12-26-2007, 11:26 AM
In the process of replacing the transfer case in MudnXJ's heep. It is a '93 and we have a replacement from a 2000. Some things look different, will it fit???
sglide
12-26-2007, 12:04 PM
i would think it should
both should be 23 spline
were they both hooked to an auto tranny?
icemanii
12-26-2007, 12:32 PM
As far as I know they both were. The two major differences I see are shown below.

1] Bolt hole missing on new case, is there a spot inside for this bolt to go thru?
Old case:

http://i106.photobucket.com/albums/m273/icemanii/other/Picture006-1.jpg

New case:

http://i106.photobucket.com/albums/m273/icemanii/other/Picture004-1.jpg

Extra switch on new case:

http://i106.photobucket.com/albums/m273/icemanii/other/Picture002-1.jpg

Also, how the heck do you remove this 'slinger'?

http://i106.photobucket.com/albums/m273/icemanii/other/arrow.jpg
shawn
12-26-2007, 05:42 PM
I just made like 3 posts over at gl4x4, I ain't about to type that all over again :D
icemanii
12-26-2007, 06:40 PM
Got it Shawn, thanks. Looks like you were answering both Nick in Cali and I. Got our transfer case rebuilt and installed now. Just have to hook up the linkage for the 4WD and the driveshafts. Should be good to go then.
Jeepr
12-26-2007, 08:07 PM
The kid get a new Jeep?

His white one was a 95.
icemanii
12-27-2007, 12:35 PM
The kid get a new Jeep?

His white one was a 95.

The white one was a YJ also, now he has an XJ. Still breaking things though.:rolleyes:

Have the case together and in, now just have to install the driveshafts and hook up the linkage.
Jeepr
12-28-2007, 09:05 AM
The white one was a YJ also, now he has an XJ. Still breaking things though.:rolleyes:

Oops, didn't realize he changed his screen name! :fryingpan: