would this truck have a front dana 60?

[Blackjackbender]

1986 Ford F250 4x4 Diesel 4spd

would a diesel f-250 automatically mean a dana 60 or not neccessary.

found a truck that i could probably buy, part small shit, and scrap to cover my cost.



i know its not the most disireable dana60 but im sure I can make it work.

[Roadhouse]

Not sure...that 250 could just be a TTB 50.

[drummond]

Not sure...that 250 could just be a TTB 50.

thats quite possible. Right around that time period, either 86 or 87 I believe they switched to that front-end, with the F-250

Now I am not sure if they offered the Dana 60 in there HD-250 package? Maybe it could be one of those

[Blackjackbender]

thats quite possible. Right around that time period, either 86 or 87 I believe they switched to that front-end, with the F-250

Now I am not sure if they offered the Dana 60 in there HD-250 package? Maybe it could be one of those

it SRW but is a flat bed truck. ive only seen pictures of it on craigslist and you can see good enough to tell if it has leafs and a 44/60 or a TTB setup

[Grandman]

Not sure...that 250 could just be a TTB 50.

I owned an 86 F 250 and roadhouse is correct .

[Blackjackbender]

damn.

[sodapop]

cut/pasted from the Dana 60 Bible on Pirate

Ford

1978-79 F-350 and some F-250 (Snofighter and High GVW packages)
1986-88 F-350 with dual rear wheels (DRW)

1988-91.5 F-350 with single rear wheels (SRW)

1992-95 F-350 (all) (balljoint)

1996.5-98 F-350 (all) (balljoint)

2000 F350/F450/F550 DRW (balljoint, metric 8x170mm wheel bolt pattern F350 / 8x220mm F450/F550, unit bearing hub)

2000.5 F350/F450/F550 DRW (balljoint, metric 8x170mm wheel bolt pattern F350 / 8x220mm F450/F550, unit bearing hub)

2001 F350 DRW (balljoint, metric 8x170mm wheel bolt pattern, unit bearing hub)

2001-02 F450/F550 DRW (balljoint, metric 8x220mm wheel bolt pattern, unit bearing hub)

2002 F250/F350 SRW (balljoint, metric 8x170mm wheel bolt pattern, unit bearing hub)

2002 F450/F550 DRW (balljoint, metric 8x220mm wheel bolt pattern, unit bearing hub)

[ttocsnekia]

According to the bible, my truck was not supposed to have a 60 front in it. Mine was an 87 F-350, it could have been an oddball year. If the customer ordered the truck with a front 60 back in 86, it might have been a rare option. Are you talking about the red one on Craigslist?
Scott

[Blackjackbender]

yes the red one on craiglist.

[ttocsnekia]

If it had a 60, I would have bought it a month ago
BWAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHAAAAAA AAAAAAAAAAAAAAA

[Blackjackbender]

If it had a 60, I would have bought it a month ago
BWAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHAAAAAA AAAAAAAAAAAAAAA

:flip::flip::flip:

[ttocsnekia]

My buddy will prolly have a 79 60 for sale, around the $800 mark though.